找回密码
 注册

QQ登录

只需一步,快速开始

查看: 556|回复: 1

COD4 PB 配置文件

[复制链接]
发表于 2007-11-9 12:51:12 | 显示全部楼层 |阅读模式
pbsv.cfg

// PsB Recommended config list for CoD4 Retail by Ross Dagley-Cleworth
// Last updated: 05/10/2007
// Version 1.1

pb_sv_MsgPrefix "^3PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 2 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 4 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 15 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 1 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 120 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 900 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[Seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[Seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[Seconds]
pb_sv_ChangeMax 2 //[Max name changes allowed]
pb_sv_DupNameGrace 0 //[Seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 2 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 20 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 600 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)

;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

;PB UCON Settings / Lists
pb_sv_usessionlimit 0
pb_sv_ucontimeout 300
pb_sv_uconempty
pb_sv_uconignoreempty

;task for 24/7 streaming (important for match server) , it does not cause any lag and the stream will never stop
pb_sv_task 1 86400 pb_sv_ver

pbsvuser.cfg

// PsB Recommended CVAR list for CoD4 Retail by Ross Dagley-Cleworth
// Last updated: 05/10/2007
// Version 1.0

pb_sv_cvarempty //[empty cvar checks before being loaded below]
pb_sv_cvar cg_errordecay in 100
pb_sv_cvar cg_fov IN 65 97
pb_sv_cvar cg_hudDamageIconHeight IN 64
pb_sv_cvar cg_hudDamageIconInScope IN 0
pb_sv_cvar cg_hudDamageIconOffset IN 128
pb_sv_cvar cg_hudDamageIconTime IN 2000
pb_sv_cvar cg_hudDamageIconWidth IN 128
pb_sv_cvar cl_avidemo IN 0
pb_sv_cvar cl_forceavidemo IN 0
pb_sv_cvar cl_freelook IN 1
pb_sv_cvar cl_maxpackets IN 30 100
pb_sv_cvar cl_pitchspeed IN 140
pb_sv_cvar cl_punkbuster IN 1
pb_sv_cvar cl_yawspeed IN 140
pb_sv_cvar com_maxfps OUT 0.000001 40
pb_sv_cvar m_pitch OUT -0.015 0.015
pb_sv_cvar m_yaw IN 0.022
pb_sv_cvar pb_Sleep IN 0 500
pb_sv_cvar rate IN 5000 25000   
pb_sv_cvar r_fog IN 1
pb_sv_cvar r_fullbright IN 0
pb_sv_cvar r_picmip IN 0 3
pb_sv_cvar r_polygonOffsetBias IN -1
pb_sv_cvar r_polygonOffsetScale IN -1
pb_sv_cvar r_lightTweakAmbient IN 0 0.3
pb_sv_cvar r_drawdecals IN 1
pb_sv_cvar sensitivity IN 0 30.000001
pb_sv_cvar snaps IN 20 40
pb_sv_cvar fx_freeze IN 0
pb_sv_cvar fx_count IN 0
pb_sv_cvar fx_debugBolt IN 0
pb_sv_cvar fx_draw IN 1
pb_sv_cvar fx_enable IN 1
pb_sv_cvar fx_profile IN 0
回复

使用道具 举报

 楼主| 发表于 2007-11-9 12:52:34 | 显示全部楼层
虽然现在还没有作弊器,但是COD系列鉴定作弊一直是用行为参数监控的,比如说鼠标速度移动超过多少就算作弊,等等~
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|=|HERO|=战队

GMT+8, 2024-11-15 06:42

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表